BRQFG - THINNING LIQUID NO 14

  • MSDS: BRQFG
  • Manufacturer: SAUEREISEN CEMENTS
  • Product Name: THINNING LIQUID NO 14
  • National Stock Number: 8040-00-973-9275
Product Identification

Product ID:THINNING LIQUID NO 14
MSDS Date:05/01/1990
FSC:8040
NIIN:00-973-9275
MSDS Number: BRQFG

Responsible Party
SAUEREISEN CEMENTS
160 GAMMA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 412-963-0303;800-424-9300(CHEMTREC)

Info Phone: 412-963-0303

Cage: 80703

Contractor
SAUEREISEN CEMENTS COMPANY
PITTSBURGH, PA 15238 US

Telephone: 412-963-0303

Cage: 80703

Ingredients

SODIUM SILICATE (MFR CAS # 1344-09-8)

CAS: 6834-92-0

RTECS: VV9275000

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CAUSES IRRITATION TO SKIN,
EYES, RESPIRATORY TRACT, ESOPHAGUS AND STOMACH. NO KNOWN CHRONIC
HAZARDS. CAUSES SNEEZING, BURNING OR ITCHING IN NOSE AND THROAT
(INHALATION). CAUSES PAIN, REDNESS AN D TEARING (EYE EXPOSURE).
CAUSES ITCHING OR BURNING (SKIN EXPOSURE).
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES, GET MEDICAL ATTENTION. SKIN: FLUSH WITH WATER. REMOVE
CONTAMINATED CLOTHING. LAUNDER BEFORE REUSE. INHAL: REMOVE TO FRESH
AIR. SUPP ORT BRTHG (GIVE ARTF RESP) . INGEST: DO NOT INDUCE VOMIT.
GIVE LARGE QTY OF WATER. GET MEDICAL ATTENTION. NEVER GIVE ANYTHING
BY MOUTH TO AN UNCON PERSON.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .

Accidental Release

Spill Release Procedures:SPILL AREA WILL BE SLIPPERY; USE CARE TO AVOID
FALLING. FLUSH SPILL AREA WITH PLENTY OF WATER. QTY >100 GAL:
ISOLATE, DIKE & STORE DISCHARGE MATL, IF POSS. OTHERWISE, DISPERSE
& FLUSH W/WATER. OBSERVE ENVIRONMENTAL REGS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID FLOOR SPILLS.
Other Precautions:HIGH PH (ALKALINITY) OF UNDILUTED MATERIAL IS HARMFUL
TO AQUATIC LIFE.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED MIST RESPIRATOR WHERE
SPRAY OCCURS.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE PROVIDED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEM SFTY GOG & FULL FACE SHLD .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VP: VAPOR IS WATER. VAP DEN: VAPOR IS WATER.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:SUPP DATA
Vapor Density:SUPP DATA
Spec Gravity:1.32
pH:11.7
Evaporation Rate & Reference:<1(BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:HAZY TO CLEAR, ODORLESS LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, SALTS/ALCOHOL WILL CAUSE NON-HAZARDOUS GELATION.
Stability Condition to Avoid:FLAMMABLE HYDROGEN GAS MAY BE PRODUCED ON
PROLONGED CONTACT WITH METALS SUCH AS ALUMINUM, TIN, LEAD, & ZINC.
Hazardous Decomposition Products:NOT KNOWN.

Disposal

Waste Disposal Methods:COMPLY W/FED, ST & LOC REG. IF APPRVD, MAY BE
FLUSHED TO SEWER TO WASTE TRTMT AREA. QTY >100 GAL: NEUT W/DILUTE
ACID & LANDFILL SOLIDS ACCD TO LOC, ST & FED REGS. FLUSH NEUTRAL
LIQ TO SEWER W/PLENTY O F WATER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.